Gecko [ bayviewconstructionltd.com ]

Name	Size	Permission	Date
2to3	96 B	-rwxr-xr-x	2020-08-22 10:03
2to3-2.7	96 B	-rwxr-xr-x	2020-08-22 10:03
2to3-3.5	96 B	-rwxr-xr-x	2020-11-18 21:09
[	50.79 KB	-rwxr-xr-x	2017-02-22 12:23
ab	50.18 KB	-rwxr-xr-x	2019-10-13 15:43
addpart	22.53 KB	-rwxr-xr-x	2018-03-07 18:29
apropos	46.98 KB	-rwxr-xr-x	2016-12-13 13:10
apt	14.09 KB	-rwxr-xr-x	2020-12-07 12:45
apt-cache	78.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-cdrom	22.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-config	22.09 KB	-rwxr-xr-x	2020-12-07 12:45
apt-extracttemplates	22.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-ftparchive	238.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-get	42.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-key	25.65 KB	-rwxr-xr-x	2020-12-07 12:45
apt-listchanges	8.88 KB	-rwxr-xr-x	2017-04-10 21:14
apt-mark	42.16 KB	-rwxr-xr-x	2020-12-07 12:45
apt-sortpkgs	38.09 KB	-rwxr-xr-x	2020-12-07 12:45
arch	34.76 KB	-rwxr-xr-x	2017-02-22 12:23
aria_chk	4.76 MB	-rwxr-xr-x	2021-01-31 16:38
aria_dump_log	4.56 MB	-rwxr-xr-x	2021-01-31 16:38
aria_ftdump	4.58 MB	-rwxr-xr-x	2021-01-31 16:38
aria_pack	4.6 MB	-rwxr-xr-x	2021-01-31 16:38
aria_read_log	4.72 MB	-rwxr-xr-x	2021-01-31 16:38
awk	646.72 KB	-rwxr-xr-x	2017-01-25 16:06
b2sum	54.88 KB	-rwxr-xr-x	2017-02-22 12:23
base32	38.79 KB	-rwxr-xr-x	2017-02-22 12:23
base64	38.79 KB	-rwxr-xr-x	2017-02-22 12:23
basename	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
bashbug	6.95 KB	-rwxr-xr-x	2017-05-15 19:45
bootctl	38.41 KB	-rwxr-xr-x	2019-07-21 18:43
bsd-from	10.3 KB	-rwxr-xr-x	2017-04-12 11:22
bsd-write	14.42 KB	-rwxr-sr-x	2017-04-12 11:22
buildhash	38.38 KB	-rwxr-xr-x	2016-03-04 07:59
busctl	62.43 KB	-rwxr-xr-x	2019-07-21 18:43
c2ph	35.89 KB	-rwxr-xr-x	2020-06-20 17:33
c_rehash	6.18 KB	-rwxr-xr-x	2020-12-11 09:22
cal	29.21 KB	-rwxr-xr-x	2017-04-12 11:22
calendar	31.24 KB	-rwxr-xr-x	2017-04-12 11:22
captoinfo	78.11 KB	-rwxr-xr-x	2017-12-28 09:47
catchsegv	3.22 KB	-rwxr-xr-x	2019-02-06 21:17
catman	34.46 KB	-rwxr-xr-x	2016-12-13 13:10
certbot	385 B	-rwxr-xr-x	2020-09-26 18:25
chage	70.17 KB	-rwxr-sr-x	2017-05-17 11:59
chardet3	309 B	-rwxr-xr-x	2016-02-10 10:46
chardetect3	309 B	-rwxr-xr-x	2016-02-10 10:46
chattr	14 KB	-rwxr-xr-x	2020-07-25 09:03
chcon	63.01 KB	-rwxr-xr-x	2017-02-22 12:23
checkgid	5.99 KB	-rwxr-xr-x	2019-10-13 15:43
chfn	48.87 KB	-rwsr-xr-x	2017-05-17 11:59
chrt	30.76 KB	-rwxr-xr-x	2018-03-07 18:29
chsh	39.55 KB	-rwsr-xr-x	2017-05-17 11:59
cifsiostat	30.13 KB	-rwxr-xr-x	2017-05-25 20:26
ckbcomp	146.32 KB	-rwxr-xr-x	2017-04-07 03:55
cksum	34.76 KB	-rwxr-xr-x	2017-02-22 12:23
clear	5.99 KB	-rwxr-xr-x	2017-12-28 09:47
clear_console	10.3 KB	-rwxr-xr-x	2017-05-15 19:45
cmp	42.74 KB	-rwxr-xr-x	2017-01-09 22:55
codepage	10.27 KB	-rwxr-xr-x	2016-01-05 16:55
col	10.29 KB	-rwxr-xr-x	2017-04-12 11:22
colcrt	10.26 KB	-rwxr-xr-x	2017-04-12 11:22
colrm	10.25 KB	-rwxr-xr-x	2017-04-12 11:22
column	14.41 KB	-rwxr-xr-x	2017-04-12 11:22
comm	38.79 KB	-rwxr-xr-x	2017-02-22 12:23
compose	17.74 KB	-rwxr-xr-x	2016-05-01 11:20
corelist	12.53 KB	-rwxr-xr-x	2020-06-20 17:33
cpan	7.41 KB	-rwxr-xr-x	2020-06-20 17:33
cpan5.24-x86_64-linux-gnu	7.43 KB	-rwxr-xr-x	2020-06-20 17:33
crontab	39.32 KB	-rwxr-sr-x	2017-10-07 13:38
csplit	46.95 KB	-rwxr-xr-x	2017-02-22 12:23
ctstat	18.8 KB	-rwxr-xr-x	2017-11-24 09:22
curl	194.07 KB	-rwxr-xr-x	2020-12-17 19:12
cut	42.85 KB	-rwxr-xr-x	2017-02-22 12:23
dbilogstrip	1.35 KB	-rwxr-xr-x	2020-09-21 15:33
dbiprof	6.06 KB	-rwxr-xr-x	2020-09-21 15:33
dbiproxy	5.27 KB	-rwxr-xr-x	2020-09-21 15:33
dbus-cleanup-sockets	9.98 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-daemon	218.95 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-monitor	21.99 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-run-session	9.98 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-send	25.98 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-update-activation-environment	13.98 KB	-rwxr-xr-x	2020-07-02 19:36
dbus-uuidgen	9.98 KB	-rwxr-xr-x	2020-07-02 19:36
deallocvt	10.38 KB	-rwxr-xr-x	2016-01-05 16:55
deb-systemd-helper	19.67 KB	-rwxr-xr-x	2017-05-02 10:20
deb-systemd-invoke	4.4 KB	-rwxr-xr-x	2017-05-02 10:20
debconf	2.79 KB	-rwxr-xr-x	2017-05-21 17:08
debconf-apt-progress	11.27 KB	-rwxr-xr-x	2017-05-21 17:08
debconf-communicate	608 B	-rwxr-xr-x	2017-05-21 17:08
debconf-copydb	1.68 KB	-rwxr-xr-x	2017-05-21 17:08
debconf-escape	647 B	-rwxr-xr-x	2017-05-21 17:08
debconf-set-selections	2.87 KB	-rwxr-xr-x	2017-05-21 17:08
debconf-show	1.78 KB	-rwxr-xr-x	2017-05-21 17:08
defmt-c	5.99 KB	-rwxr-xr-x	2016-03-04 07:59
defmt-sh	5.99 KB	-rwxr-xr-x	2016-03-04 07:59
delpart	22.53 KB	-rwxr-xr-x	2018-03-07 18:29
dh_bash-completion	2.49 KB	-rwxr-xr-x	2015-08-18 19:47
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x	2016-11-07 14:53
dh_perl_dbi	1.04 KB	-rwxr-xr-x	2020-09-21 15:33
dh_pypy	12.56 KB	-rwxr-xr-x	2017-01-25 14:47
dh_python2	1.03 KB	-rwxr-xr-x	2017-01-24 13:00
dh_python3	12.77 KB	-rwxr-xr-x	2017-01-25 14:47
diff	143.38 KB	-rwxr-xr-x	2017-01-09 22:55
diff3	58.95 KB	-rwxr-xr-x	2017-01-09 22:55
dircolors	42.77 KB	-rwxr-xr-x	2017-02-22 12:23
dirname	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
discover-config	2.86 KB	-rwxr-xr-x	2018-02-26 19:38
dotlockfile	18.56 KB	-rwxr-sr-x	2017-01-17 13:05
dpkg	286.5 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-deb	146.34 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-divert	138.41 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-maintscript-helper	18.58 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-query	146.4 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-split	114.34 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-statoverride	70.25 KB	-rwxr-xr-x	2018-06-26 10:28
dpkg-trigger	66.26 KB	-rwxr-xr-x	2018-06-26 10:28
du	103.16 KB	-rwxr-xr-x	2017-02-22 12:23
dumpkeys	162.98 KB	-rwxr-xr-x	2016-01-05 16:55
dvipdf	1023 B	-rwxr-xr-x	2020-08-20 14:04
easy_install3	404 B	-rwxr-xr-x	2017-01-19 17:02
edit	17.74 KB	-rwxr-xr-x	2016-05-01 11:20
editor	220.04 KB	-rwxr-xr-x	2017-01-11 02:10
enc2xs	40.21 KB	-rwxr-xr-x	2020-06-20 17:33
encguess	2.99 KB	-rwxr-xr-x	2020-06-20 17:33
env	30.76 KB	-rwxr-xr-x	2017-02-22 12:23
envsubst	34.7 KB	-rwxr-xr-x	2019-08-30 23:30
eps2eps	639 B	-rwxr-xr-x	2020-08-20 14:04
eqn	185.19 KB	-rwxr-xr-x	2016-12-13 13:06
ex	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
expand	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
expiry	22.27 KB	-rwxr-sr-x	2017-05-17 11:59
expr	42.82 KB	-rwxr-xr-x	2017-02-22 12:23
factor	74.88 KB	-rwxr-xr-x	2017-02-22 12:23
faillog	18.29 KB	-rwxr-xr-x	2017-05-17 11:59
fallocate	26.64 KB	-rwxr-xr-x	2018-03-07 18:29
fcgistarter	9.99 KB	-rwxr-xr-x	2019-10-13 15:43
filan	83.85 KB	-rwxr-xr-x	2017-07-14 13:52
file	22.26 KB	-rwxr-xr-x	2019-10-22 20:20
file-rename	3.1 KB	-rwxr-xr-x	2015-06-04 22:55
find	216.57 KB	-rwxr-xr-x	2017-02-18 15:37
findaffix	11.74 KB	-rwxr-xr-x	2016-03-04 07:59
flock	26.79 KB	-rwxr-xr-x	2018-03-07 18:29
fmt	38.79 KB	-rwxr-xr-x	2017-02-22 12:23
fold	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
free	18.08 KB	-rwxr-xr-x	2018-05-17 10:56
from	10.3 KB	-rwxr-xr-x	2017-04-12 11:22
futurize	384 B	-rwxr-xr-x	2016-09-23 17:38
galera_new_cluster	888 B	-rwxr-xr-x	2021-01-31 16:38
galera_recovery	3.28 KB	-rwxr-xr-x	2021-01-31 16:38
gawk	646.72 KB	-rwxr-xr-x	2017-01-25 16:06
geqn	185.19 KB	-rwxr-xr-x	2016-12-13 13:06
getconf	22.37 KB	-rwxr-xr-x	2019-02-06 21:17
getent	23.31 KB	-rwxr-xr-x	2019-02-06 21:17
getkeycodes	10.37 KB	-rwxr-xr-x	2016-01-05 16:55
getopt	14.49 KB	-rwxr-xr-x	2018-03-07 18:29
gettext	34.68 KB	-rwxr-xr-x	2019-08-30 23:30
gettext.sh	4.52 KB	-rwxr-xr-x	2019-08-30 23:30
ghostscript	10.24 KB	-rwxr-xr-x	2020-08-20 14:04
gpasswd	74.02 KB	-rwsr-xr-x	2017-05-17 11:59
gpg	977.35 KB	-rwxr-xr-x	2019-02-07 20:57
gpg-agent	376.63 KB	-rwxr-xr-x	2019-02-07 20:57
gpg-connect-agent	150.73 KB	-rwxr-xr-x	2019-02-07 20:57
gpg-zip	3.36 KB	-rwxr-xr-x	2019-02-07 20:57
gpgconf	157.41 KB	-rwxr-xr-x	2019-02-07 20:57
gpgparsemail	26.07 KB	-rwxr-xr-x	2019-02-07 20:57
gpgsplit	74.33 KB	-rwxr-xr-x	2019-02-07 20:57
gpgv	410.64 KB	-rwxr-xr-x	2019-02-07 20:57
gpic	196.03 KB	-rwxr-xr-x	2016-12-13 13:06
groff	101.31 KB	-rwxr-xr-x	2016-12-13 13:06
grog	2.71 KB	-rwxr-xr-x	2016-12-13 13:06
grops	161.72 KB	-rwxr-xr-x	2016-12-13 13:06
grotty	117.34 KB	-rwxr-xr-x	2016-12-13 13:06
groups	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
grub-editenv	236.97 KB	-rwxr-xr-x	2019-06-12 11:20
grub-file	660.64 KB	-rwxr-xr-x	2019-06-12 11:20
grub-fstest	786.75 KB	-rwxr-xr-x	2019-06-12 11:20
grub-glue-efi	232.81 KB	-rwxr-xr-x	2019-06-12 11:20
grub-kbdcomp	1.64 KB	-rwxr-xr-x	2019-06-12 11:20
grub-menulst2cfg	216.83 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkfont	261.47 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkimage	325.88 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mklayout	241.09 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mknetdir	366.55 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkpasswd-pbkdf2	241.16 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkrelpath	232.5 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkrescue	819.39 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mkstandalone	442.88 KB	-rwxr-xr-x	2019-06-12 11:20
grub-mount	605.28 KB	-rwxr-xr-x	2019-06-12 11:20
grub-ntldr-img	34.45 KB	-rwxr-xr-x	2019-06-12 11:20
grub-render-label	673.23 KB	-rwxr-xr-x	2019-06-12 11:20
grub-script-check	260.63 KB	-rwxr-xr-x	2019-06-12 11:20
grub-syslinux2cfg	621.75 KB	-rwxr-xr-x	2019-06-12 11:20
gs	10.24 KB	-rwxr-xr-x	2020-08-20 14:04
gsbj	350 B	-rwxr-xr-x	2020-08-20 14:04
gsdj	352 B	-rwxr-xr-x	2020-08-20 14:04
gsdj500	352 B	-rwxr-xr-x	2020-08-20 14:04
gslj	353 B	-rwxr-xr-x	2020-08-20 14:04
gslp	350 B	-rwxr-xr-x	2020-08-20 14:04
gsnd	277 B	-rwxr-xr-x	2020-08-20 14:04
gtbl	118.2 KB	-rwxr-xr-x	2016-12-13 13:06
h2ph	28.52 KB	-rwxr-xr-x	2020-06-20 17:33
h2xs	59.39 KB	-rwxr-xr-x	2020-06-20 17:33
hd	26.61 KB	-rwxr-xr-x	2017-04-12 11:22
head	42.82 KB	-rwxr-xr-x	2017-02-22 12:23
helpztags	2.46 KB	-rwxr-xr-x	2019-06-21 04:10
hexdump	26.61 KB	-rwxr-xr-x	2017-04-12 11:22
host	114.45 KB	-rwxr-xr-x	2020-08-26 18:03
hostid	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
hostnamectl	18.34 KB	-rwxr-xr-x	2019-07-21 18:43
htcacheclean	30 KB	-rwxr-xr-x	2019-10-13 15:43
htdbm	17.99 KB	-rwxr-xr-x	2019-10-13 15:43
htdigest	9.99 KB	-rwxr-xr-x	2019-10-13 15:43
htpasswd	17.99 KB	-rwxr-xr-x	2019-10-13 15:43
i386	18.73 KB	-rwxr-xr-x	2018-03-07 18:29
icombine	34.38 KB	-rwxr-xr-x	2016-03-04 07:59
iconv	55.01 KB	-rwxr-xr-x	2019-02-06 21:17
id	42.91 KB	-rwxr-xr-x	2017-02-22 12:23
igawk	3.11 KB	-rwxr-xr-x	2017-01-25 16:06
ijoin	14.1 KB	-rwxr-xr-x	2016-03-04 07:59
infocmp	58.07 KB	-rwxr-xr-x	2017-12-28 09:47
infotocap	78.11 KB	-rwxr-xr-x	2017-12-28 09:47
innochecksum	3.42 MB	-rwxr-xr-x	2021-01-31 16:38
innotop	445.81 KB	-rwxr-xr-x	2020-10-12 17:40
install	135.61 KB	-rwxr-xr-x	2017-02-22 12:23
instmodsh	4.27 KB	-rwxr-xr-x	2020-06-20 17:33
ionice	26.66 KB	-rwxr-xr-x	2018-03-07 18:29
iostat	42.13 KB	-rwxr-xr-x	2017-05-25 20:26
ipcmk	26.77 KB	-rwxr-xr-x	2018-03-07 18:29
ipcrm	26.63 KB	-rwxr-xr-x	2018-03-07 18:29
ipcs	50.79 KB	-rwxr-xr-x	2018-03-07 18:29
iptables-xml	92.74 KB	-rwxr-xr-x	2017-04-12 09:41
ischroot	10.3 KB	-rwxr-xr-x	2017-04-02 17:10
ispell	94.46 KB	-rwxr-xr-x	2016-03-04 07:59
ispell-wrapper	7.05 KB	-rwxr-xr-x	2016-10-10 09:58
join	46.85 KB	-rwxr-xr-x	2017-02-22 12:23
json_pp	3.86 KB	-rwxr-xr-x	2020-06-20 17:33
kbdinfo	10.38 KB	-rwxr-xr-x	2016-01-05 16:55
kbxutil	154.63 KB	-rwxr-xr-x	2019-02-07 20:57
kernel-install	3.91 KB	-rwxr-xr-x	2019-07-21 18:43
killall	23.68 KB	-rwxr-xr-x	2015-08-17 13:18
last	42.85 KB	-rwxr-xr-x	2018-03-07 18:29
lastb	42.85 KB	-rwxr-xr-x	2018-03-07 18:29
lastlog	18.07 KB	-rwxr-xr-x	2017-05-17 11:59
lcf	7.6 KB	-rwxr-xr-x	2016-03-16 20:58
ldd	5.27 KB	-rwxr-xr-x	2019-02-06 21:17
less	161.82 KB	-rwxr-xr-x	2016-02-28 11:28
lessecho	10.02 KB	-rwxr-xr-x	2016-02-28 11:28
lessfile	7.58 KB	-rwxr-xr-x	2016-02-28 11:28
lesskey	19.36 KB	-rwxr-xr-x	2016-02-28 11:28
lesspipe	7.58 KB	-rwxr-xr-x	2016-02-28 11:28
letsencrypt	385 B	-rwxr-xr-x	2020-09-26 18:25
lexgrog	90.57 KB	-rwxr-xr-x	2016-12-13 13:10
lft	2.43 KB	-rwxr-xr-x	2016-08-29 15:45
lft.db	2.43 KB	-rwxr-xr-x	2016-08-29 15:45
libnetcfg	15.39 KB	-rwxr-xr-x	2020-06-20 17:33
line	10.4 KB	-rwxr-xr-x	2018-03-07 18:29
link	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
linux-boot-prober	1.54 KB	-rwxr-xr-x	2017-01-20 15:28
linux-check-removal	3.99 KB	-rwxr-xr-x	2016-06-21 02:48
linux-update-symlinks	6.17 KB	-rwxr-xr-x	2016-06-05 01:13
linux-version	2.63 KB	-rwxr-xr-x	2015-08-11 15:45
linux32	18.73 KB	-rwxr-xr-x	2018-03-07 18:29
linux64	18.73 KB	-rwxr-xr-x	2018-03-07 18:29
lnstat	18.8 KB	-rwxr-xr-x	2017-11-24 09:22
loadkeys	199.46 KB	-rwxr-xr-x	2016-01-05 16:55
loadunimap	26.68 KB	-rwxr-xr-x	2016-01-05 16:55
locale	37.91 KB	-rwxr-xr-x	2019-02-06 21:17
localectl	26.41 KB	-rwxr-xr-x	2019-07-21 18:43
localedef	295.69 KB	-rwxr-xr-x	2019-02-06 21:17
logger	43.43 KB	-rwxr-xr-x	2018-03-07 18:29
logname	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
logresolve	10 KB	-rwxr-xr-x	2019-10-13 15:43
look	10.33 KB	-rwxr-xr-x	2017-04-12 11:22
lorder	2.78 KB	-rwxr-xr-x	2017-04-12 11:22
lsattr	10 KB	-rwxr-xr-x	2020-07-25 09:03
lsb_release	3.55 KB	-rwxr-xr-x	2015-08-26 09:44
lscpu	63.2 KB	-rwxr-xr-x	2018-03-07 18:29
lsinitramfs	625 B	-rwxr-xr-x	2017-03-06 22:42
lsipc	71.12 KB	-rwxr-xr-x	2018-03-07 18:29
lslocks	35.16 KB	-rwxr-xr-x	2018-03-07 18:29
lslogins	59.27 KB	-rwxr-xr-x	2018-03-07 18:29
lsns	38.87 KB	-rwxr-xr-x	2018-03-07 18:29
lsof	159.31 KB	-rwxr-xr-x	2015-09-13 21:46
lspci	80.31 KB	-rwxr-xr-x	2016-11-30 06:53
lspgpot	1.06 KB	-rwxr-xr-x	2014-06-25 16:17
lzcat	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
lzcmp	6.48 KB	-rwxr-xr-x	2016-10-08 13:11
lzdiff	6.48 KB	-rwxr-xr-x	2016-10-08 13:11
lzegrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
lzfgrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
lzgrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
lzless	1.76 KB	-rwxr-xr-x	2016-10-08 13:11
lzma	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
lzmainfo	10.38 KB	-rwxr-xr-x	2016-10-08 13:11
lzmore	2.11 KB	-rwxr-xr-x	2016-10-08 13:11
man	104.5 KB	-rwxr-xr-x	2016-12-13 13:10
mandb	126.72 KB	-rwxr-xr-x	2016-12-13 13:10
manpath	30.47 KB	-rwxr-xr-x	2016-12-13 13:10
mapscrn	18.65 KB	-rwxr-xr-x	2016-01-05 16:55
mariabackup	17.34 MB	-rwxr-xr-x	2021-01-31 16:38
mariadb	4.12 MB	-rwxr-xr-x	2021-01-31 16:38
mariadb-service-convert	2.43 KB	-rwxr-xr-x	2021-01-31 16:38
mariadbcheck	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mawk	119.12 KB	-rwxr-xr-x	2012-03-23 20:15
mbstream	3.4 MB	-rwxr-xr-x	2021-01-31 16:38
mcookie	30.79 KB	-rwxr-xr-x	2018-03-07 18:29
md5sum	42.85 KB	-rwxr-xr-x	2017-02-22 12:23
md5sum.textutils	42.85 KB	-rwxr-xr-x	2017-02-22 12:23
mesg	10.45 KB	-rwxr-xr-x	2018-03-07 18:29
migrate-pubring-from-classic-gpg	2.14 KB	-rwxr-xr-x	2018-10-03 00:58
mk_modmap	15.78 KB	-rwxr-xr-x	2016-01-05 16:55
mkfifo	63.04 KB	-rwxr-xr-x	2017-02-22 12:23
mkpasswd	18.57 KB	-rwxr-xr-x	2017-07-27 15:45
mpstat	38.15 KB	-rwxr-xr-x	2017-05-25 20:26
msql2mysql	1.41 KB	-rwxr-xr-x	2021-01-31 16:38
mtr	84.72 KB	-rwsr-xr-x	2017-01-02 18:20
munchlist	31.23 KB	-rwxr-xr-x	2016-03-04 07:59
my_print_defaults	3.39 MB	-rwxr-xr-x	2021-01-31 16:38
myisam_ftdump	3.75 MB	-rwxr-xr-x	2021-01-31 16:38
myisamchk	3.87 MB	-rwxr-xr-x	2021-01-31 16:38
myisamlog	3.73 MB	-rwxr-xr-x	2021-01-31 16:38
myisampack	3.77 MB	-rwxr-xr-x	2021-01-31 16:38
mysql	4.12 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_convert_table_format	4.12 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_embedded	16.03 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_find_rows	3.21 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_fix_extensions	1.22 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_install_db	19.15 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_plugin	3.39 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_secure_installation	12.23 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_setpermission	17.07 KB	-rwxr-xr-x	2021-01-31 16:38
mysql_tzinfo_to_sql	3.39 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_upgrade	3.47 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_waitpid	3.38 MB	-rwxr-xr-x	2021-01-31 16:38
mysql_zap	3.77 KB	-rwxr-xr-x	2021-01-31 16:38
mysqlaccess	109.33 KB	-rwxr-xr-x	2021-01-31 16:38
mysqladmin	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlanalyze	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlbinlog	4.08 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlcheck	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mysqld_multi	23.84 KB	-rwxr-xr-x	2021-01-31 16:38
mysqld_safe	30.79 KB	-rwxr-xr-x	2021-01-31 16:38
mysqld_safe_helper	3.35 MB	-rwxr-xr-x	2021-01-31 16:38
mysqldump	3.99 MB	-rwxr-xr-x	2021-01-31 16:38
mysqldumpslow	8.05 KB	-rwxr-xr-x	2021-01-31 16:38
mysqlhotcopy	34.12 KB	-rwxr-xr-x	2021-01-31 16:38
mysqlimport	3.9 MB	-rwxr-xr-x	2021-01-31 16:38
mysqloptimize	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlrepair	3.91 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlreport	50.03 KB	-rwxr-xr-x	2020-10-12 17:40
mysqlshow	3.9 MB	-rwxr-xr-x	2021-01-31 16:38
mysqlslap	3.92 MB	-rwxr-xr-x	2021-01-31 16:38
mytop	63.3 KB	-rwxr-xr-x	2021-01-31 16:38
namei	26.66 KB	-rwxr-xr-x	2018-03-07 18:29
nawk	646.72 KB	-rwxr-xr-x	2017-01-25 16:06
ncal	29.21 KB	-rwxr-xr-x	2017-04-12 11:22
neqn	908 B	-rwxr-xr-x	2016-12-13 13:06
newgrp	39.37 KB	-rwsr-xr-x	2017-05-17 11:59
ngettext	34.7 KB	-rwxr-xr-x	2019-08-30 23:30
nice	34.76 KB	-rwxr-xr-x	2017-02-22 12:23
nl	38.91 KB	-rwxr-xr-x	2017-02-22 12:23
nohup	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
nproc	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
nroff	3.25 KB	-rwxr-xr-x	2016-12-13 13:06
nsenter	30.95 KB	-rwxr-xr-x	2018-03-07 18:29
nstat	22.67 KB	-rwxr-xr-x	2017-11-24 09:22
numfmt	58.91 KB	-rwxr-xr-x	2017-02-22 12:23
od	66.91 KB	-rwxr-xr-x	2017-02-22 12:23
on_ac_power	2.2 KB	-rwxr-xr-x	2009-12-02 08:57
openssl	639.48 KB	-rwxr-xr-x	2020-12-11 09:22
os-prober	4.44 KB	-rwxr-xr-x	2017-01-31 03:56
pager	161.82 KB	-rwxr-xr-x	2016-02-28 11:28
paperconf	10.34 KB	-rwxr-xr-x	2016-11-11 11:28
partx	83.63 KB	-rwxr-xr-x	2018-03-07 18:29
passwd	58.28 KB	-rwsr-xr-x	2017-05-17 11:59
paste	34.79 KB	-rwxr-xr-x	2017-02-22 12:23
pasteurize	388 B	-rwxr-xr-x	2016-09-23 17:38
pathchk	30.76 KB	-rwxr-xr-x	2017-02-22 12:23
pbr	152 B	-rwxr-xr-x	2016-09-21 14:14
pcimodules	14.59 KB	-rwxr-xr-x	2016-11-30 06:53
pdb	45.02 KB	-rwxr-xr-x	2020-08-22 10:03
pdb2.7	45.02 KB	-rwxr-xr-x	2020-08-22 10:03
pdb3	59.7 KB	-rwxr-xr-x	2020-11-18 21:09
pdb3.5	59.7 KB	-rwxr-xr-x	2020-11-18 21:09
pdf2dsc	698 B	-rwxr-xr-x	2020-08-20 14:04
pdf2ps	909 B	-rwxr-xr-x	2020-08-20 14:04
peekfd	10.52 KB	-rwxr-xr-x	2015-08-17 13:18
perf	528 B	-rwxr-xr-x	2016-09-16 23:34
perl	1.93 MB	-rwxr-xr-x	2020-06-20 17:33
perl5.24-x86_64-linux-gnu	10.24 KB	-rwxr-xr-x	2020-06-20 17:33
perl5.24.1	1.93 MB	-rwxr-xr-x	2020-06-20 17:33
perlbug	44.46 KB	-rwxr-xr-x	2020-06-20 17:33
perldoc	125 B	-rwxr-xr-x	2020-06-20 17:33
perlivp	10.61 KB	-rwxr-xr-x	2020-06-20 17:33
perlthanks	44.46 KB	-rwxr-xr-x	2020-06-20 17:33
perror	3.54 MB	-rwxr-xr-x	2021-01-31 16:38
pf2afm	498 B	-rwxr-xr-x	2020-08-20 14:04
pfbtopfa	516 B	-rwxr-xr-x	2020-08-20 14:04
pg	38.89 KB	-rwxr-xr-x	2018-03-07 18:29
pgrep	26.09 KB	-rwxr-xr-x	2018-05-17 10:56
phar	14.54 KB	-rwxr-xr-x	2021-02-12 14:49
phar.phar	14.54 KB	-rwxr-xr-x	2021-02-12 14:49
phar.phar7.0	14.48 KB	-rwxr-xr-x	2020-10-06 17:08
phar.phar7.4	14.54 KB	-rwxr-xr-x	2021-02-12 14:49
phar7.0	14.48 KB	-rwxr-xr-x	2020-10-06 17:08
phar7.4	14.54 KB	-rwxr-xr-x	2021-02-12 14:49
phar7.4.phar	14.54 KB	-rwxr-xr-x	2021-02-12 14:49
php	4.46 MB	-rwxr-xr-x	2021-02-12 14:49
php7.0	4.19 MB	-rwxr-xr-x	2020-10-06 17:08
php7.4	4.46 MB	-rwxr-xr-x	2021-02-12 14:49
pic	196.03 KB	-rwxr-xr-x	2016-12-13 13:06
pico	220.04 KB	-rwxr-xr-x	2017-01-11 02:10
piconv	8.16 KB	-rwxr-xr-x	2020-06-20 17:33
pidstat	54.15 KB	-rwxr-xr-x	2017-05-25 20:26
pinentry	54.46 KB	-rwxr-xr-x	2017-02-06 08:56
pinentry-curses	54.46 KB	-rwxr-xr-x	2017-02-06 08:56
pinky	38.95 KB	-rwxr-xr-x	2017-02-22 12:23
pkill	26.09 KB	-rwxr-xr-x	2018-05-17 10:56
pl2pm	4.42 KB	-rwxr-xr-x	2020-06-20 17:33
pldd	14.57 KB	-rwxr-xr-x	2019-02-06 21:17
pmap	30.09 KB	-rwxr-xr-x	2018-05-17 10:56
pod2html	4.04 KB	-rwxr-xr-x	2020-06-20 17:33
pod2man	13.84 KB	-rwxr-xr-x	2020-06-20 17:33
pod2text	10.72 KB	-rwxr-xr-x	2020-06-20 17:33
pod2usage	3.86 KB	-rwxr-xr-x	2020-06-20 17:33
podchecker	3.61 KB	-rwxr-xr-x	2020-06-20 17:33
podselect	2.47 KB	-rwxr-xr-x	2020-06-20 17:33
pphs	404 B	-rwxr-xr-x	2020-08-20 14:04
pr	75.01 KB	-rwxr-xr-x	2017-02-22 12:23
preconv	42.2 KB	-rwxr-xr-x	2016-12-13 13:06
prename	3.13 KB	-rwxr-xr-x	2020-06-20 17:33
print	17.74 KB	-rwxr-xr-x	2016-05-01 11:20
printafm	395 B	-rwxr-xr-x	2020-08-20 14:04
printenv	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
printerbanner	18.28 KB	-rwxr-xr-x	2017-04-12 11:22
printf	50.79 KB	-rwxr-xr-x	2017-02-22 12:23
prlimit	31.38 KB	-rwxr-xr-x	2018-03-07 18:29
procan	71.74 KB	-rwxr-xr-x	2017-07-14 13:52
prove	13.27 KB	-rwxr-xr-x	2020-06-20 17:33
prtstat	14.42 KB	-rwxr-xr-x	2015-08-17 13:18
ps2ascii	631 B	-rwxr-xr-x	2020-08-20 14:04
ps2epsi	2.69 KB	-rwxr-xr-x	2020-08-20 14:04
ps2pdf	272 B	-rwxr-xr-x	2020-08-20 14:04
ps2pdf12	215 B	-rwxr-xr-x	2020-08-20 14:04
ps2pdf13	215 B	-rwxr-xr-x	2020-08-20 14:04
ps2pdf14	215 B	-rwxr-xr-x	2020-08-20 14:04
ps2pdfwr	1.07 KB	-rwxr-xr-x	2020-08-20 14:04
ps2ps	647 B	-rwxr-xr-x	2020-08-20 14:04
ps2ps2	669 B	-rwxr-xr-x	2020-08-20 14:04
ps2txt	631 B	-rwxr-xr-x	2020-08-20 14:04
psfaddtable	18.38 KB	-rwxr-xr-x	2016-01-05 16:55
psfgettable	18.38 KB	-rwxr-xr-x	2016-01-05 16:55
psfstriptable	18.38 KB	-rwxr-xr-x	2016-01-05 16:55
psfxtable	18.38 KB	-rwxr-xr-x	2016-01-05 16:55
pstree	27.49 KB	-rwxr-xr-x	2015-08-17 13:18
pstree.x11	27.49 KB	-rwxr-xr-x	2015-08-17 13:18
pstruct	35.89 KB	-rwxr-xr-x	2020-06-20 17:33
ptar	3.48 KB	-rwxr-xr-x	2020-06-20 17:33
ptardiff	2.57 KB	-rwxr-xr-x	2020-06-20 17:33
ptargrep	4.29 KB	-rwxr-xr-x	2020-06-20 17:33
ptx	71.01 KB	-rwxr-xr-x	2017-02-22 12:23
pwdx	10.07 KB	-rwxr-xr-x	2018-05-17 10:56
py3clean	7.62 KB	-rwxr-xr-x	2017-01-20 10:03
py3compile	11.83 KB	-rwxr-xr-x	2017-01-20 10:03
py3versions	11.44 KB	-rwxr-xr-x	2017-01-20 10:03
pybuild	21.75 KB	-rwxr-xr-x	2017-01-25 14:47
pyclean	4.03 KB	-rwxr-xr-x	2017-01-24 13:00
pycompile	11.62 KB	-rwxr-xr-x	2017-01-24 13:00
pydoc	79 B	-rwxr-xr-x	2020-08-22 10:03
pydoc2.7	79 B	-rwxr-xr-x	2020-08-22 10:03
pydoc3	79 B	-rwxr-xr-x	2020-11-18 21:09
pydoc3.5	79 B	-rwxr-xr-x	2020-11-18 21:09
pygettext	21.58 KB	-rwxr-xr-x	2020-08-22 10:03
pygettext2.7	21.58 KB	-rwxr-xr-x	2020-08-22 10:03
pygettext3	21.73 KB	-rwxr-xr-x	2020-11-18 21:09
pygettext3.5	21.73 KB	-rwxr-xr-x	2020-11-18 21:09
python	3.62 MB	-rwxr-xr-x	2020-08-22 10:03
python2	3.62 MB	-rwxr-xr-x	2020-08-22 10:03
python2.7	3.62 MB	-rwxr-xr-x	2020-08-22 10:03
python3	4.54 MB	-rwxr-xr-x	2020-11-18 21:09
python3-futurize	384 B	-rwxr-xr-x	2016-09-23 17:38
python3-pasteurize	388 B	-rwxr-xr-x	2016-09-23 17:38
python3-pbr	152 B	-rwxr-xr-x	2016-09-21 14:14
python3.5	4.54 MB	-rwxr-xr-x	2020-11-18 21:09
python3.5m	4.54 MB	-rwxr-xr-x	2020-11-18 21:09
python3m	4.54 MB	-rwxr-xr-x	2020-11-18 21:09
pyversions	14.75 KB	-rwxr-xr-x	2017-01-24 13:00
querybts	10.59 KB	-rwxr-xr-x	2019-08-29 14:19
rcp	86.14 KB	-rwxr-xr-x	2019-07-15 13:32
realpath	46.82 KB	-rwxr-xr-x	2017-02-22 12:23
rename	3.1 KB	-rwxr-xr-x	2015-06-04 22:55
rename.ul	14.48 KB	-rwxr-xr-x	2018-03-07 18:29
renice	10.36 KB	-rwxr-xr-x	2018-03-07 18:29
replace	3.36 MB	-rwxr-xr-x	2021-01-31 16:38
report-hw	2.05 KB	-rwxr-xr-x	2015-12-30 04:01
reportbug	103.63 KB	-rwxr-xr-x	2019-08-29 14:19
reset	22 KB	-rwxr-xr-x	2017-12-28 09:47
resizecons	18.65 KB	-rwxr-xr-x	2016-01-05 16:55
resizepart	38.86 KB	-rwxr-xr-x	2018-03-07 18:29
resolve_stack_dump	3.38 MB	-rwxr-xr-x	2021-01-31 16:38
resolveip	3.38 MB	-rwxr-xr-x	2021-01-31 16:38
rev	10.45 KB	-rwxr-xr-x	2018-03-07 18:29
rgrep	30 B	-rwxr-xr-x	2016-11-28 21:59
rlogin	714.86 KB	-rwxr-xr-x	2019-07-15 13:32
rotatelogs	18.07 KB	-rwxr-xr-x	2019-10-13 15:43
routef	173 B	-rwxr-xr-x	2017-11-24 09:22
routel	1.23 KB	-rwxr-xr-x	2017-11-24 09:22
rsh	714.86 KB	-rwxr-xr-x	2019-07-15 13:32
rsync	472.3 KB	-rwxr-xr-x	2019-03-15 10:39
rtstat	18.8 KB	-rwxr-xr-x	2017-11-24 09:22
run-mailcap	17.74 KB	-rwxr-xr-x	2016-05-01 11:20
runcon	34.85 KB	-rwxr-xr-x	2017-02-22 12:23
rview	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
rvim	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
sadf	282.37 KB	-rwxr-xr-x	2017-05-25 20:26
sar	109.7 KB	-rwxr-xr-x	2017-05-25 20:26
sar.sysstat	109.7 KB	-rwxr-xr-x	2017-05-25 20:26
savelog	10.22 KB	-rwxr-xr-x	2017-04-02 17:10
scp	86.14 KB	-rwxr-xr-x	2019-07-15 13:32
screendump	10.34 KB	-rwxr-xr-x	2016-01-05 16:55
script	22.73 KB	-rwxr-xr-x	2018-03-07 18:29
scriptreplay	22.63 KB	-rwxr-xr-x	2018-03-07 18:29
sdiff	50.85 KB	-rwxr-xr-x	2017-01-09 22:55
see	17.74 KB	-rwxr-xr-x	2016-05-01 11:20
select-default-iwrap	474 B	-rwxr-xr-x	2016-10-10 09:58
select-editor	1.19 KB	-rwxr-xr-x	2017-12-20 13:39
sensible-browser	1.11 KB	-rwxr-xr-x	2017-12-20 13:39
sensible-editor	1.08 KB	-rwxr-xr-x	2017-12-20 13:39
sensible-pager	288 B	-rwxr-xr-x	2017-12-20 13:39
seq	46.82 KB	-rwxr-xr-x	2017-02-22 12:23
setarch	18.73 KB	-rwxr-xr-x	2018-03-07 18:29
setkeycodes	10.37 KB	-rwxr-xr-x	2016-01-05 16:55
setleds	14.35 KB	-rwxr-xr-x	2016-01-05 16:55
setlogcons	10.37 KB	-rwxr-xr-x	2016-01-05 16:55
setmetamode	10.4 KB	-rwxr-xr-x	2016-01-05 16:55
setpci	22.54 KB	-rwxr-xr-x	2016-11-30 06:53
setsid	10.45 KB	-rwxr-xr-x	2018-03-07 18:29
setterm	38.68 KB	-rwxr-xr-x	2018-03-07 18:29
setvtrgb	10.46 KB	-rwxr-xr-x	2016-01-05 16:55
sftp	134.36 KB	-rwxr-xr-x	2019-07-15 13:32
sg	39.37 KB	-rwsr-xr-x	2017-05-17 11:59
sha1sum	46.85 KB	-rwxr-xr-x	2017-02-22 12:23
sha224sum	54.85 KB	-rwxr-xr-x	2017-02-22 12:23
sha256sum	54.85 KB	-rwxr-xr-x	2017-02-22 12:23
sha384sum	58.85 KB	-rwxr-xr-x	2017-02-22 12:23
sha512sum	58.85 KB	-rwxr-xr-x	2017-02-22 12:23
shasum	9.15 KB	-rwxr-xr-x	2020-06-20 17:33
showconsolefont	18.45 KB	-rwxr-xr-x	2016-01-05 16:55
showkey	14.63 KB	-rwxr-xr-x	2016-01-05 16:55
shred	59.01 KB	-rwxr-xr-x	2017-02-22 12:23
shuf	54.91 KB	-rwxr-xr-x	2017-02-22 12:23
skill	26.08 KB	-rwxr-xr-x	2018-05-17 10:56
slabtop	18.08 KB	-rwxr-xr-x	2018-05-17 10:56
slogin	714.86 KB	-rwxr-xr-x	2019-07-15 13:32
snice	26.08 KB	-rwxr-xr-x	2018-05-17 10:56
socat	369.47 KB	-rwxr-xr-x	2017-07-14 13:52
soelim	30.2 KB	-rwxr-xr-x	2016-12-13 13:06
sort	107.52 KB	-rwxr-xr-x	2017-02-22 12:23
splain	18.37 KB	-rwxr-xr-x	2020-06-20 17:33
split	55.38 KB	-rwxr-xr-x	2017-02-22 12:23
splitfont	10.25 KB	-rwxr-xr-x	2016-01-05 16:55
sq	5.99 KB	-rwxr-xr-x	2016-03-04 07:59
ssh	714.86 KB	-rwxr-xr-x	2019-07-15 13:32
ssh-add	330.21 KB	-rwxr-xr-x	2019-07-15 13:32
ssh-agent	350.22 KB	-rwxr-sr-x	2019-07-15 13:32
ssh-argv0	1.42 KB	-rwxr-xr-x	2019-03-01 16:19
ssh-copy-id	10.13 KB	-rwxr-xr-x	2016-12-19 04:59
ssh-keygen	390.23 KB	-rwxr-xr-x	2019-07-15 13:32
ssh-keyscan	406.23 KB	-rwxr-xr-x	2019-07-15 13:32
stat	83.1 KB	-rwxr-xr-x	2017-02-22 12:23
stdbuf	46.82 KB	-rwxr-xr-x	2017-02-22 12:23
sudo	137.64 KB	-rwsr-xr-x	2021-01-23 09:10
sudoedit	137.64 KB	-rwsr-xr-x	2021-01-23 09:10
sudoreplay	46.59 KB	-rwxr-xr-x	2021-01-23 09:10
sum	38.83 KB	-rwxr-xr-x	2017-02-22 12:23
symcryptrun	110.6 KB	-rwxr-xr-x	2019-02-07 20:57
systemd-analyze	1010.6 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-cat	10.34 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-cgls	14.34 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-cgtop	30.44 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-delta	22.41 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-detect-virt	10.33 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-mount	30.35 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-path	10.33 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-resolve	78.34 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-run	38.34 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-socket-activate	22.34 KB	-rwxr-xr-x	2019-07-21 18:43
systemd-stdio-bridge	14.34 KB	-rwxr-xr-x	2019-07-21 18:43
tabs	13.99 KB	-rwxr-xr-x	2017-12-28 09:47
tac	38.82 KB	-rwxr-xr-x	2017-02-22 12:23
tail	66.98 KB	-rwxr-xr-x	2017-02-22 12:23
tapestat	34.13 KB	-rwxr-xr-x	2017-05-25 20:26
tasksel	16.1 KB	-rwxr-xr-x	2016-12-24 12:46
taskset	30.75 KB	-rwxr-xr-x	2018-03-07 18:29
tbl	118.2 KB	-rwxr-xr-x	2016-12-13 13:06
tee	34.82 KB	-rwxr-xr-x	2017-02-22 12:23
telnet	104.42 KB	-rwxr-xr-x	2016-11-07 18:06
telnet.netkit	104.42 KB	-rwxr-xr-x	2016-11-07 18:06
test	46.79 KB	-rwxr-xr-x	2017-02-22 12:23
tic	78.11 KB	-rwxr-xr-x	2017-12-28 09:47
timedatectl	22.34 KB	-rwxr-xr-x	2019-07-21 18:43
timeout	39.35 KB	-rwxr-xr-x	2017-02-22 12:23
tload	14.09 KB	-rwxr-xr-x	2018-05-17 10:56
toe	13.99 KB	-rwxr-xr-x	2017-12-28 09:47
top	105.77 KB	-rwxr-xr-x	2018-05-17 10:56
touch	90.98 KB	-rwxr-xr-x	2017-02-22 12:23
tput	18.02 KB	-rwxr-xr-x	2017-12-28 09:47
tr	46.79 KB	-rwxr-xr-x	2017-02-22 12:23
traceproto	2.82 KB	-rwxr-xr-x	2016-08-29 15:45
traceproto.db	2.82 KB	-rwxr-xr-x	2016-08-29 15:45
traceroute	67.16 KB	-rwxr-xr-x	2016-08-29 15:45
traceroute-nanog	1.58 KB	-rwxr-xr-x	2016-08-29 15:45
traceroute.db	67.16 KB	-rwxr-xr-x	2016-08-29 15:45
traceroute6	67.16 KB	-rwxr-xr-x	2016-08-29 15:45
traceroute6.db	67.16 KB	-rwxr-xr-x	2016-08-29 15:45
troff	695.34 KB	-rwxr-xr-x	2016-12-13 13:06
truncate	38.76 KB	-rwxr-xr-x	2017-02-22 12:23
tryaffix	4.8 KB	-rwxr-xr-x	2016-03-04 07:59
tset	22 KB	-rwxr-xr-x	2017-12-28 09:47
tsort	34.76 KB	-rwxr-xr-x	2017-02-22 12:23
tty	30.76 KB	-rwxr-xr-x	2017-02-22 12:23
tzselect	14.83 KB	-rwxr-xr-x	2019-02-06 21:17
ucf	39.68 KB	-rwxr-xr-x	2016-03-16 20:58
ucfq	18.91 KB	-rwxr-xr-x	2016-03-16 20:58
ucfr	10.47 KB	-rwxr-xr-x	2016-03-16 20:58
ul	14.34 KB	-rwxr-xr-x	2017-04-12 11:22
unexpand	34.82 KB	-rwxr-xr-x	2017-02-22 12:23
unicode_stop	530 B	-rwxr-xr-x	2016-01-05 16:55
uniq	42.85 KB	-rwxr-xr-x	2017-02-22 12:23
unlink	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
unlzma	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
unmkinitramfs	2.79 KB	-rwxr-xr-x	2017-03-06 22:42
unshare	18.82 KB	-rwxr-xr-x	2018-03-07 18:29
unsq	9.99 KB	-rwxr-xr-x	2016-03-04 07:59
unxz	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
update-alternatives	46.01 KB	-rwxr-xr-x	2018-06-26 10:28
update-mime-database	672 B	-rwxr-xr-x	2018-03-14 18:01
update-mime-database.real	51.23 KB	-rwxr-xr-x	2018-03-14 18:01
uptime	10.07 KB	-rwxr-xr-x	2018-05-17 10:56
users	30.79 KB	-rwxr-xr-x	2017-02-22 12:23
utmpdump	22.71 KB	-rwxr-xr-x	2018-03-07 18:29
vi	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
view	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
vim	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
vim.basic	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
vim.tiny	1.01 MB	-rwxr-xr-x	2019-06-21 04:10
vimdiff	2.3 MB	-rwxr-xr-x	2019-06-21 04:10
vimtutor	2.05 KB	-rwxr-xr-x	2019-06-21 04:10
vmstat	30.09 KB	-rwxr-xr-x	2018-05-17 10:56
w	18.07 KB	-rwxr-xr-x	2018-05-17 10:56
w.procps	18.07 KB	-rwxr-xr-x	2018-05-17 10:56
wall	26.8 KB	-rwxr-sr-x	2018-03-07 18:29
watch	22.41 KB	-rwxr-xr-x	2018-05-17 10:56
watchgnupg	13.99 KB	-rwxr-xr-x	2019-02-07 20:57
wc	42.86 KB	-rwxr-xr-x	2017-02-22 12:23
wget	479.56 KB	-rwxr-xr-x	2019-04-05 13:05
whatis	46.98 KB	-rwxr-xr-x	2016-12-13 13:10
whereis	27.09 KB	-rwxr-xr-x	2018-03-07 18:29
which	946 B	-rwxr-xr-x	2017-04-02 17:10
whiptail	26.77 KB	-rwxr-xr-x	2016-10-15 08:00
who	50.95 KB	-rwxr-xr-x	2017-02-22 12:23
whoami	30.76 KB	-rwxr-xr-x	2017-02-22 12:23
whois	149.18 KB	-rwxr-xr-x	2017-07-27 15:45
write	14.42 KB	-rwxr-sr-x	2017-04-12 11:22
wsrep_sst_common	10.51 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_mariabackup	36.97 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_mysqldump	7.69 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_rsync	14.96 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_rsync_wan	14.96 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_xtrabackup	20.77 KB	-rwxr-xr-x	2021-01-31 16:38
wsrep_sst_xtrabackup-v2	40.73 KB	-rwxr-xr-x	2021-01-31 16:38
x86_64	18.73 KB	-rwxr-xr-x	2018-03-07 18:29
xargs	66.21 KB	-rwxr-xr-x	2017-02-18 15:37
xauth	47.47 KB	-rwxr-xr-x	2014-07-13 08:34
xdg-user-dir	234 B	-rwxr-xr-x	2014-09-19 09:17
xdg-user-dirs-update	18.59 KB	-rwxr-xr-x	2014-09-19 09:17
xsubpp	5.04 KB	-rwxr-xr-x	2020-06-20 17:33
xxd	18.12 KB	-rwxr-xr-x	2019-06-21 04:10
xz	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
xzcat	75.38 KB	-rwxr-xr-x	2016-10-08 13:11
xzcmp	6.48 KB	-rwxr-xr-x	2016-10-08 13:11
xzdiff	6.48 KB	-rwxr-xr-x	2016-10-08 13:11
xzegrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
xzfgrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
xzgrep	5.5 KB	-rwxr-xr-x	2016-10-08 13:11
xzless	1.76 KB	-rwxr-xr-x	2016-10-08 13:11
xzmore	2.11 KB	-rwxr-xr-x	2016-10-08 13:11
yes	30.73 KB	-rwxr-xr-x	2017-02-22 12:23
zdump	14.42 KB	-rwxr-xr-x	2019-02-06 21:17
zipdetails	47.36 KB	-rwxr-xr-x	2020-06-20 17:33

Rename

#!/bin/bash -ue
# Copyright (C) 2013 Percona Inc
# Copyright (C) 2017-2019 MariaDB
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to the
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston
# MA  02110-1335  USA.

# Documentation:
# http://www.percona.com/doc/percona-xtradb-cluster/manual/xtrabackup_sst.html
# Make sure to read that before proceeding!

. $(dirname $0)/wsrep_sst_common

OS=$(uname)
ealgo=""
ekey=""
ekeyfile=""
encrypt=0
nproc=1
ecode=0
ssyslog=""
ssystag=""
XTRABACKUP_PID=""
SST_PORT=""
REMOTEIP=""
tcert=""
tpem=""
tkey=""
sockopt=""
progress=""
ttime=0
totime=0
lsn=""
ecmd=""
rlimit=""
# Initially
stagemsg="${WSREP_SST_OPT_ROLE}"
cpat=""
speciald=1
ib_home_dir=""
ib_log_dir=""
ib_undo_dir=""

sfmt="tar"
strmcmd=""
tfmt=""
tcmd=""
rebuild=0
rebuildcmd=""
payload=0
pvformat="-F '%N => Rate:%r Avg:%a Elapsed:%t %e Bytes: %b %p' "
pvopts="-f -i 10 -N $WSREP_SST_OPT_ROLE "
STATDIR=""
uextra=0
disver=""

tmpopts=""
itmpdir=""
xtmpdir=""

scomp=""
sdecomp=""

# Required for backup locks
# For backup locks it is 1 sent by joiner
# 5.6.21 PXC and later can't donate to an older joiner
sst_ver=1

if pv --help 2>/dev/null | grep -q FORMAT;then
    pvopts+=$pvformat
fi
pcmd="pv $pvopts"
declare -a RC

set +e
INNOBACKUPEX_BIN=$(which mariabackup)
if test -z $INNOBACKUPEX_BIN
then
  wsrep_log_error 'mariabackup binary not found in $PATH'
  exit 42
fi
set -e
XBSTREAM_BIN=mbstream
XBCRYPT_BIN=xbcrypt # Not available in MariaBackup

DATA="${WSREP_SST_OPT_DATA}"
INFO_FILE="xtrabackup_galera_info"
IST_FILE="xtrabackup_ist"
MAGIC_FILE="${DATA}/${INFO_FILE}"
INNOAPPLYLOG="${DATA}/mariabackup.prepare.log"
INNOMOVELOG="${DATA}/mariabackup.move.log"
INNOBACKUPLOG="${DATA}/mariabackup.backup.log"

# Setting the path for ss and ip
export PATH="/usr/sbin:/sbin:$PATH"

timeit(){
    local stage=$1
    shift
    local cmd="$@"
    local x1 x2 took extcode

if [[ $ttime -eq 1 ]];then 
        x1=$(date +%s)
        wsrep_log_info "Evaluating $cmd"
        eval "$cmd"
        extcode=$?
        x2=$(date +%s)
        took=$(( x2-x1 ))
        wsrep_log_info "NOTE: $stage took $took seconds"
        totime=$(( totime+took ))
    else 
        wsrep_log_info "Evaluating $cmd"
        eval "$cmd"
        extcode=$?
    fi
    return $extcode
}

get_keys()
{
    # $encrypt -eq 1 is for internal purposes only
    if [[ $encrypt -ge 2 || $encrypt -eq -1 ]];then 
        return 
    fi

if [[ $encrypt -eq 0 ]];then 
        if $MY_PRINT_DEFAULTS xtrabackup | grep -q encrypt;then
            wsrep_log_error "Unexpected option combination. SST may fail. Refer to http://www.percona.com/doc/percona-xtradb-cluster/manual/xtrabackup_sst.html"
        fi
        return
    fi

if [[ $sfmt == 'tar' ]];then
        wsrep_log_info "NOTE: Xtrabackup-based encryption - encrypt=1 - cannot be enabled with tar format"
        encrypt=-1
        return
    fi

wsrep_log_info "Xtrabackup based encryption enabled in my.cnf - Supported only from Xtrabackup 2.1.4"

if [[ -z $ealgo ]];then
        wsrep_log_error "FATAL: Encryption algorithm empty from my.cnf, bailing out"
        exit 3
    fi

if [[ -z $ekey && ! -r $ekeyfile ]];then
        wsrep_log_error "FATAL: Either key or keyfile must be readable"
        exit 3
    fi

if [[ -z $ekey ]];then
        ecmd="${XBCRYPT_BIN} --encrypt-algo=$ealgo --encrypt-key-file=$ekeyfile"
    else
        ecmd="${XBCRYPT_BIN} --encrypt-algo=$ealgo --encrypt-key=$ekey"
    fi

if [[ "$WSREP_SST_OPT_ROLE" == "joiner" ]];then
        ecmd+=" -d"
    fi

stagemsg+="-XB-Encrypted"
}

get_transfer()
{
    if [[ -z $SST_PORT ]];then 
        TSST_PORT=4444
    else 
        TSST_PORT=$SST_PORT
    fi

if [[ $tfmt == 'nc' ]];then
	wsrep_check_programs nc

wsrep_log_info "Using netcat as streamer"
        if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
            if nc -h 2>&1 | grep -q ncat;then 
                # Ncat
                tcmd="nc -l ${TSST_PORT}"
            elif nc -h 2>&1 | grep -q -- '-d\>';then
                # Debian netcat
                tcmd="nc -dl ${TSST_PORT}"
            else
                # traditional netcat
                tcmd="nc -l -p ${TSST_PORT}"
            fi
        else
            if nc -h 2>&1 | grep -q ncat;then
                # Ncat
                tcmd="nc ${REMOTEIP} ${TSST_PORT}"
            elif nc -h 2>&1 | grep -q -- '-d\>';then
                # Debian netcat
                tcmd="nc ${REMOTEIP} ${TSST_PORT}"
            else
                # traditional netcat
                tcmd="nc -q0 ${REMOTEIP} ${TSST_PORT}"
            fi
        fi
    else
        tfmt='socat'
	wsrep_check_programs socat
        wsrep_log_info "Using socat as streamer"

if [[ $encrypt -eq 2 || $encrypt -eq 3 ]] && ! socat -V | grep -q "WITH_OPENSSL 1";then
            wsrep_log_error "Encryption requested, but socat is not OpenSSL enabled (encrypt=$encrypt)"
            exit 2
        fi

if [[ $encrypt -eq 2 ]];then 
            wsrep_log_info "Using openssl based encryption with socat: with crt and pem"
            if [[ -z $tpem || -z $tcert ]];then 
                wsrep_log_error "Both PEM and CRT files required"
                exit 22
            fi
            stagemsg+="-OpenSSL-Encrypted-2"
            if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
                wsrep_log_info "Decrypting with cert=${tpem}, cafile=${tcert}"
                tcmd="socat -u openssl-listen:${TSST_PORT},reuseaddr,cert=${tpem},cafile=${tcert}${sockopt} stdio"
            else
                wsrep_log_info "Encrypting with cert=${tpem}, cafile=${tcert}"
                tcmd="socat -u stdio openssl-connect:${REMOTEIP}:${TSST_PORT},cert=${tpem},cafile=${tcert}${sockopt}"
            fi
        elif [[ $encrypt -eq 3 ]];then
            wsrep_log_info "Using openssl based encryption with socat: with key and crt"
            if [[ -z $tpem || -z $tkey ]];then
                wsrep_log_error "Both certificate and key files required"
                exit 22
            fi
            stagemsg+="-OpenSSL-Encrypted-3"
            if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
                if [[ -z $tcert ]];then
                    wsrep_log_info "Decrypting with cert=${tpem}, key=${tkey}, verify=0"
                    tcmd="socat -u openssl-listen:${TSST_PORT},reuseaddr,cert=${tpem},key=${tkey},verify=0${sockopt} stdio"
                else
                    wsrep_log_info "Decrypting with cert=${tpem}, key=${tkey}, cafile=${tcert}"
                    tcmd="socat -u openssl-listen:${TSST_PORT},reuseaddr,cert=${tpem},key=${tkey},cafile=${tcert}${sockopt} stdio"
                fi
            else
                if [[ -z $tcert ]];then
                    wsrep_log_info "Encrypting with cert=${tpem}, key=${tkey}, verify=0"
                    tcmd="socat -u stdio openssl-connect:${REMOTEIP}:${TSST_PORT},cert=${tpem},key=${tkey},verify=0${sockopt}"
                else
                    wsrep_log_info "Encrypting with cert=${tpem}, key=${tkey}, cafile=${tcert}"
                    tcmd="socat -u stdio openssl-connect:${REMOTEIP}:${TSST_PORT},cert=${tpem},key=${tkey},cafile=${tcert}${sockopt}"
                fi
            fi

else 
            if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
                tcmd="socat -u TCP-LISTEN:${TSST_PORT},reuseaddr${sockopt} stdio"
            else
                tcmd="socat -u stdio TCP:${REMOTEIP}:${TSST_PORT}${sockopt}"
            fi
        fi
    fi

}

parse_cnf()
{
    local group=$1
    local var=$2
    # print the default settings for given group using my_print_default.
    # normalize the variable names specified in cnf file (user can use _ or - for example log-bin or log_bin)
    # then grep for needed variable
    # finally get the variable value (if variables has been specified multiple time use the last value only)
    reval=$($MY_PRINT_DEFAULTS $group | awk -F= '{if ($1 ~ /_/) { gsub(/_/,"-",$1); print $1"="$2 } else { print $0 }}' | grep -- "--$var=" | cut -d= -f2- | tail -1)
    if [[ -z $reval ]];then 
        [[ -n $3 ]] && reval=$3
    fi
    echo $reval
}

get_footprint()
{
    pushd $WSREP_SST_OPT_DATA 1>/dev/null
    payload=$(find . -regex '.*\.ibd$\|.*\.MYI$\|.*\.MYD$\|.*ibdata1$' -type f -print0 | du --files0-from=- --block-size=1 -c | awk 'END { print $1 }')
    if $MY_PRINT_DEFAULTS xtrabackup | grep -q -- "--compress";then 
        # QuickLZ has around 50% compression ratio
        # When compression/compaction used, the progress is only an approximate.
        payload=$(( payload*1/2 ))
    fi
    popd 1>/dev/null
    pcmd+=" -s $payload"
    adjust_progress
}

adjust_progress()
{

if ! command -v pv >/dev/null;then
        wsrep_log_error "pv not found in path: $PATH"
        wsrep_log_error "Disabling all progress/rate-limiting"
        pcmd=""
        rlimit=""
        progress=""
        return
    fi

if [[ -n $progress && $progress != '1' ]];then 
        if [[ -e $progress ]];then 
            pcmd+=" 2>>$progress"
        else 
            pcmd+=" 2>$progress"
        fi
    elif [[ -z $progress && -n $rlimit  ]];then 
            # When rlimit is non-zero
            pcmd="pv -q"
    fi

if [[ -n $rlimit && "$WSREP_SST_OPT_ROLE"  == "donor" ]];then
        wsrep_log_info "Rate-limiting SST to $rlimit"
        pcmd+=" -L \$rlimit"
    fi
}

read_cnf()
{
    sfmt=$(parse_cnf sst streamfmt "xbstream")
    tfmt=$(parse_cnf sst transferfmt "socat")
    tcert=$(parse_cnf sst tca "")
    tpem=$(parse_cnf sst tcert "")
    tkey=$(parse_cnf sst tkey "")
    encrypt=$(parse_cnf sst encrypt 0)
    sockopt=$(parse_cnf sst sockopt "")
    progress=$(parse_cnf sst progress "")
    rebuild=$(parse_cnf sst rebuild 0)
    ttime=$(parse_cnf sst time 0)
    cpat=$(parse_cnf sst cpat '.*galera\.cache$\|.*sst_in_progress$\|.*\.sst$\|.*gvwstate\.dat$\|.*grastate\.dat$\|.*\.err$\|.*\.log$\|.*RPM_UPGRADE_MARKER$\|.*RPM_UPGRADE_HISTORY$')
    [[ $OS == "FreeBSD" ]] && cpat=$(parse_cnf sst cpat '.*galera\.cache$|.*sst_in_progress$|.*\.sst$|.*gvwstate\.dat$|.*grastate\.dat$|.*\.err$|.*\.log$|.*RPM_UPGRADE_MARKER$|.*RPM_UPGRADE_HISTORY$')
    ealgo=$(parse_cnf xtrabackup encrypt "")
    ekey=$(parse_cnf xtrabackup encrypt-key "")
    ekeyfile=$(parse_cnf xtrabackup encrypt-key-file "")
    scomp=$(parse_cnf sst compressor "")
    sdecomp=$(parse_cnf sst decompressor "")

# Refer to http://www.percona.com/doc/percona-xtradb-cluster/manual/xtrabackup_sst.html 
    if [[ -z $ealgo ]];then
        ealgo=$(parse_cnf sst encrypt-algo "")
        ekey=$(parse_cnf sst encrypt-key "")
        ekeyfile=$(parse_cnf sst encrypt-key-file "")
    fi

rlimit=$(parse_cnf sst rlimit "")
    uextra=$(parse_cnf sst use-extra 0)
    speciald=$(parse_cnf sst sst-special-dirs 1)
    iopts=$(parse_cnf sst inno-backup-opts "")
    iapts=$(parse_cnf sst inno-apply-opts "")
    impts=$(parse_cnf sst inno-move-opts "")
    stimeout=$(parse_cnf sst sst-initial-timeout 100)
    ssyslog=$(parse_cnf sst sst-syslog 0)
    ssystag=$(parse_cnf mysqld_safe syslog-tag "${SST_SYSLOG_TAG:-}")
    ssystag+="-"
    sstlogarchive=$(parse_cnf sst sst-log-archive 1)
    sstlogarchivedir=$(parse_cnf sst sst-log-archive-dir "/tmp/sst_log_archive")

if [[ $speciald -eq 0 ]];then 
        wsrep_log_error "sst-special-dirs equal to 0 is not supported, falling back to 1"
        speciald=1
    fi

if [[ $ssyslog -ne -1 ]];then 
        if $MY_PRINT_DEFAULTS mysqld_safe | tr '_' '-' | grep -q -- "--syslog";then 
            ssyslog=1
        fi
    fi

if [[ $encrypt -eq 1 ]]; then
        wsrep_log_error "Xtrabackup-based encryption is currently not" \
            "supported with MariaBackup"
        exit 2
    fi
}

get_stream()
{
    if [[ $sfmt == 'mbstream' || $sfmt == 'xbstream' ]];then
        wsrep_log_info "Streaming with ${sfmt}"
        if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
            strmcmd="${XBSTREAM_BIN} -x"
        else
            strmcmd="${XBSTREAM_BIN} -c \${INFO_FILE}"
        fi
    else
        sfmt="tar"
        wsrep_log_info "Streaming with tar"
        if [[ "$WSREP_SST_OPT_ROLE"  == "joiner" ]];then
            strmcmd="tar xfi - "
        else
            strmcmd="tar cf - \${INFO_FILE} "
        fi

fi
}

get_proc()
{
    set +e
    nproc=$(grep -c processor /proc/cpuinfo)
    [[ -z $nproc || $nproc -eq 0 ]] && nproc=1
    set -e
}

sig_joiner_cleanup()
{
    wsrep_log_error "Removing $MAGIC_FILE file due to signal"
    rm -f "$MAGIC_FILE"
}

cleanup_joiner()
{
    # Since this is invoked just after exit NNN
    local estatus=$?
    if [[ $estatus -ne 0 ]];then 
        wsrep_log_error "Cleanup after exit with status:$estatus"
    elif [ "${WSREP_SST_OPT_ROLE}" = "joiner" ];then
        wsrep_log_info "Removing the sst_in_progress file"
        wsrep_cleanup_progress_file
    fi
    if [[ -n $progress && -p $progress ]];then 
        wsrep_log_info "Cleaning up fifo file $progress"
        rm $progress
    fi
    if [[ -n ${STATDIR:-} ]];then 
       [[ -d $STATDIR ]] && rm -rf $STATDIR
    fi

# Final cleanup 
    pgid=$(ps -o pgid= $$ | grep -o '[0-9]*')

# This means no setsid done in mysqld.
    # We don't want to kill mysqld here otherwise.
    if [[ $$ -eq $pgid ]];then

# This means a signal was delivered to the process.
        # So, more cleanup. 
        if [[ $estatus -ge 128 ]];then 
            kill -KILL -$$ || true
        fi

exit $estatus
}

check_pid()
{
    local pid_file="$1"
    [ -r "$pid_file" ] && ps -p $(cat "$pid_file") >/dev/null 2>&1
}

cleanup_donor()
{
    # Since this is invoked just after exit NNN
    local estatus=$?
    if [[ $estatus -ne 0 ]];then 
        wsrep_log_error "Cleanup after exit with status:$estatus"
    fi

if [[ -n ${XTRABACKUP_PID:-} ]];then 
        if check_pid $XTRABACKUP_PID
        then
            wsrep_log_error "xtrabackup process is still running. Killing..."
            kill_xtrabackup
        fi

fi
    rm -f ${DATA}/${IST_FILE} || true

if [[ -n $progress && -p $progress ]];then 
        wsrep_log_info "Cleaning up fifo file $progress"
        rm -f $progress || true
    fi

wsrep_log_info "Cleaning up temporary directories"

if [[ -n $xtmpdir ]];then 
       [[ -d $xtmpdir ]] &&  rm -rf $xtmpdir || true
    fi

if [[ -n $itmpdir ]];then 
       [[ -d $itmpdir ]] &&  rm -rf $itmpdir || true
    fi

# Final cleanup 
    pgid=$(ps -o pgid= $$ | grep -o '[0-9]*')

# This means no setsid done in mysqld.
    # We don't want to kill mysqld here otherwise.
    if [[ $$ -eq $pgid ]];then

# This means a signal was delivered to the process.
        # So, more cleanup. 
        if [[ $estatus -ge 128 ]];then 
            kill -KILL -$$ || true
        fi

exit $estatus

}

kill_xtrabackup()
{
    local PID=$(cat $XTRABACKUP_PID)
    [ -n "$PID" -a "0" != "$PID" ] && kill $PID && (kill $PID && kill -9 $PID) || :
    wsrep_log_info "Removing xtrabackup pid file $XTRABACKUP_PID"
    rm -f "$XTRABACKUP_PID" || true
}

setup_ports()
{
    if [[ "$WSREP_SST_OPT_ROLE"  == "donor" ]];then
        if [ "${WSREP_SST_OPT_ADDR#\[}" != "$WSREP_SST_OPT_ADDR" ]; then
            remain=$(echo $WSREP_SST_OPT_ADDR | awk -F '\\][:/]' '{ print $2 }')
            REMOTEIP=$(echo $WSREP_SST_OPT_ADDR | awk -F '\\]:' '{ print $1 }')"]"
            SST_PORT=$(echo $remain | awk -F '[:/]' '{ print $1 }')
            lsn=$(echo $remain | awk -F '[:/]' '{ print $3 }')
            sst_ver=$(echo $remain | awk -F '[:/]' '{ print $4 }')
        else
            SST_PORT=$(echo $WSREP_SST_OPT_ADDR | awk -F '[:/]' '{ print $2 }')
            REMOTEIP=$(echo $WSREP_SST_OPT_ADDR | awk -F ':' '{ print $1 }')
            lsn=$(echo $WSREP_SST_OPT_ADDR | awk -F '[:/]' '{ print $4 }')
            sst_ver=$(echo $WSREP_SST_OPT_ADDR | awk -F '[:/]' '{ print $5 }')
        fi
    else
        if [ "${WSREP_SST_OPT_ADDR#\[}" != "$WSREP_SST_OPT_ADDR" ]; then
            SST_PORT=$(echo ${WSREP_SST_OPT_ADDR} | awk -F '\\]:' '{ print $2 }')
        else
            SST_PORT=$(echo ${WSREP_SST_OPT_ADDR} | awk -F ':' '{ print $2 }')
        fi
    fi
}

# waits ~10 seconds for nc to open the port and then reports ready
# (regardless of timeout)
wait_for_listen()
{
    local PORT=$1
    local ADDR=$2
    local MODULE=$3
    for i in {1..50}
    do
	if [ "$OS" = "FreeBSD" ];then
            sockstat -46lp $PORT | grep -qE "^[^ ]* *(socat|nc) *[^ ]* *[^ ]* *[^ ]* *[^ ]*:$PORT" && break
	else
	    ss -p state listening "( sport = :$PORT )" | grep -qE 'socat|nc' && break
	fi
	sleep 0.2
    done
    echo "ready ${ADDR}/${MODULE}//$sst_ver"
}

check_extra()
{
    local use_socket=1
    if [[ $uextra -eq 1 ]];then 
        if $MY_PRINT_DEFAULTS --mysqld | tr '_' '-' | grep -- "--thread-handling=" | grep -q 'pool-of-threads';then 
            local eport=$($MY_PRINT_DEFAULTS --mysqld | tr '_' '-' | grep -- "--extra-port=" | cut -d= -f2)
            if [[ -n $eport ]];then 
                # Xtrabackup works only locally.
                # Hence, setting host to 127.0.0.1 unconditionally. 
                wsrep_log_info "SST through extra_port $eport"
                INNOEXTRA+=" --host=127.0.0.1 --port=$eport"
                use_socket=0
            else 
                wsrep_log_error "Extra port $eport null, failing"
                exit 1
            fi
        else 
            wsrep_log_info "Thread pool not set, ignore the option use_extra"
        fi
    fi
    if [[ $use_socket -eq 1 ]] && [[ -n "$WSREP_SST_OPT_SOCKET" ]];then
        INNOEXTRA+=" --socket=$WSREP_SST_OPT_SOCKET"
    fi
}

recv_joiner()
{
    local dir=$1
    local msg=$2 
    local tmt=$3
    local checkf=$4
    local ltcmd

if [[ ! -d ${dir} ]];then
        # This indicates that IST is in progress
        return
    fi

pushd ${dir} 1>/dev/null
    set +e

if [[ $tmt -gt 0 ]] && command -v timeout >/dev/null;then
        if timeout --help | grep -q -- '-k';then 
            ltcmd="timeout -k $(( tmt+10 )) $tmt $tcmd"
        else 
            ltcmd="timeout -s9 $tmt $tcmd"
        fi
        timeit "$msg" "$ltcmd | $strmcmd; RC=( "\${PIPESTATUS[@]}" )"
    else 
        timeit "$msg" "$tcmd | $strmcmd; RC=( "\${PIPESTATUS[@]}" )"
    fi

set -e
    popd 1>/dev/null

if [[ ${RC[0]} -eq 124 ]];then 
        wsrep_log_error "Possible timeout in receving first data from donor in gtid stage"
        exit 32
    fi

for ecode in "${RC[@]}";do 
        if [[ $ecode -ne 0 ]];then 
            wsrep_log_error "Error while getting data from donor node: " \
                            "exit codes: ${RC[@]}"
            exit 32
        fi
    done

if [[ $checkf -eq 1 && ! -r "${MAGIC_FILE}" ]];then
        # this message should cause joiner to abort
        wsrep_log_error "xtrabackup process ended without creating '${MAGIC_FILE}'"
        wsrep_log_info "Contents of datadir" 
        wsrep_log_info "$(ls -l ${dir}/*)"
        exit 32
    fi
}

send_donor()
{
    local dir=$1
    local msg=$2

pushd ${dir} 1>/dev/null
    set +e
    timeit "$msg" "$strmcmd | $tcmd; RC=( "\${PIPESTATUS[@]}" )"
    set -e
    popd 1>/dev/null

}

monitor_process()
{
    local sst_stream_pid=$1

while true ; do

if ! ps -p "${WSREP_SST_OPT_PARENT}" &>/dev/null; then
            wsrep_log_error "Parent mysqld process (PID:${WSREP_SST_OPT_PARENT}) terminated unexpectedly." 
            kill -- -"${WSREP_SST_OPT_PARENT}"
            exit 32
        fi

if ! ps -p "${sst_stream_pid}" &>/dev/null; then
            break
        fi

sleep 0.1

done
}

wsrep_check_programs "$INNOBACKUPEX_BIN"

rm -f "${MAGIC_FILE}"

if [[ ! ${WSREP_SST_OPT_ROLE} == 'joiner' && ! ${WSREP_SST_OPT_ROLE} == 'donor' ]];then 
    wsrep_log_error "Invalid role ${WSREP_SST_OPT_ROLE}"
    exit 22
fi

read_cnf
setup_ports

if ${INNOBACKUPEX_BIN} /tmp --help 2>/dev/null | grep -q -- '--version-check'; then 
    disver="--no-version-check"
fi

if [[ ${FORCE_FTWRL:-0} -eq 1 ]];then 
    wsrep_log_info "Forcing FTWRL due to environment variable FORCE_FTWRL equal to $FORCE_FTWRL"
    iopts+=" --no-backup-locks "
fi

INNOEXTRA=$WSREP_SST_OPT_MYSQLD

INNODB_DATA_HOME_DIR=${INNODB_DATA_HOME_DIR:-""}
# Try to set INNODB_DATA_HOME_DIR from the command line:
if [ ! -z "$INNODB_DATA_HOME_DIR_ARG" ]; then
    INNODB_DATA_HOME_DIR=$INNODB_DATA_HOME_DIR_ARG
fi
# if no command line arg and INNODB_DATA_HOME_DIR environment variable
# is not set, try to get it from my.cnf:
if [ -z "$INNODB_DATA_HOME_DIR" ]; then
    INNODB_DATA_HOME_DIR=$(parse_cnf mysqld$WSREP_SST_OPT_SUFFIX_VALUE innodb-data-home-dir '')
fi
if [ -z "$INNODB_DATA_HOME_DIR" ]; then
    INNODB_DATA_HOME_DIR=$(parse_cnf --mysqld innodb-data-home-dir '')
fi
if [ ! -z "$INNODB_DATA_HOME_DIR" ]; then
   INNOEXTRA+=" --innodb-data-home-dir=$INNODB_DATA_HOME_DIR"
fi

if [ -n "$INNODB_DATA_HOME_DIR" ]; then
    # handle both relative and absolute paths
    INNODB_DATA_HOME_DIR=$(cd $DATA; mkdir -p "$INNODB_DATA_HOME_DIR"; cd $INNODB_DATA_HOME_DIR; pwd -P)
else
    # default to datadir
    INNODB_DATA_HOME_DIR=$(cd $DATA; pwd -P)
fi

if [[ $ssyslog -eq 1 ]];then

if ! command -v logger >/dev/null;then
        wsrep_log_error "logger not in path: $PATH. Ignoring"
    else

wsrep_log_info "Logging all stderr of SST/Innobackupex to syslog"

exec 2> >(logger -p daemon.err -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE)

wsrep_log_error()
        {
            logger  -p daemon.err -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE "$@" 
        }

wsrep_log_info()
        {
            logger  -p daemon.info -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE "$@" 
        }

INNOAPPLY="${INNOBACKUPEX_BIN} --innobackupex $disver $iapts \$INNOEXTRA --apply-log \$rebuildcmd \${DATA} 2>&1 | logger -p daemon.err -t ${ssystag}innobackupex-apply"
        INNOMOVE="${INNOBACKUPEX_BIN} --innobackupex ${WSREP_SST_OPT_CONF} $disver $impts  --move-back --force-non-empty-directories \${DATA} 2>&1 | logger -p daemon.err -t ${ssystag}innobackupex-move"
        INNOBACKUP="${INNOBACKUPEX_BIN} --innobackupex ${WSREP_SST_OPT_CONF} $disver $iopts \$tmpopts \$INNOEXTRA --galera-info --stream=\$sfmt \$itmpdir 2> >(logger -p daemon.err -t ${ssystag}innobackupex-backup)"
    fi

else

if [[ "$sstlogarchive" -eq 1 ]]
then
    ARCHIVETIMESTAMP=$(date "+%Y.%m.%d-%H.%M.%S.%N")
    newfile=""

if [[ ! -z "$sstlogarchivedir" ]]
    then
        if [[ ! -d "$sstlogarchivedir" ]]
        then
            mkdir -p "$sstlogarchivedir"
        fi
    fi

if [ -e "${INNOAPPLYLOG}" ]
    then
        if [[ ! -z "$sstlogarchivedir" ]]
        then
            newfile=$sstlogarchivedir/$(basename "${INNOAPPLYLOG}").${ARCHIVETIMESTAMP}
        else
            newfile=${INNOAPPLYLOG}.${ARCHIVETIMESTAMP}
        fi
   
        wsrep_log_info "Moving ${INNOAPPLYLOG} to ${newfile}"
        mv "${INNOAPPLYLOG}" "${newfile}"
        gzip "${newfile}"
    fi

if [ -e "${INNOMOVELOG}" ]
    then
        if [[ ! -z "$sstlogarchivedir" ]]
        then
            newfile=$sstlogarchivedir/$(basename "${INNOMOVELOG}").${ARCHIVETIMESTAMP}
        else
            newfile=${INNOMOVELOG}.${ARCHIVETIMESTAMP}
        fi

wsrep_log_info "Moving ${INNOMOVELOG} to ${newfile}"
        mv "${INNOMOVELOG}" "${newfile}"
        gzip "${newfile}"
    fi

if [ -e "${INNOBACKUPLOG}" ]
    then
        if [[ ! -z "$sstlogarchivedir" ]]
        then
            newfile=$sstlogarchivedir/$(basename "${INNOBACKUPLOG}").${ARCHIVETIMESTAMP}
        else
            newfile=${INNOBACKUPLOG}.${ARCHIVETIMESTAMP}
        fi

wsrep_log_info "Moving ${INNOBACKUPLOG} to ${newfile}"
        mv "${INNOBACKUPLOG}" "${newfile}"
        gzip "${newfile}"
    fi

fi
 
    INNOAPPLY="${INNOBACKUPEX_BIN} --innobackupex $disver $iapts \$INNOEXTRA --apply-log \$rebuildcmd \${DATA} &> ${INNOAPPLYLOG}"
    INNOMOVE="${INNOBACKUPEX_BIN} --innobackupex ${WSREP_SST_OPT_CONF} $disver $impts  --move-back --force-non-empty-directories \${DATA} &> ${INNOMOVELOG}"
    INNOBACKUP="${INNOBACKUPEX_BIN} --innobackupex ${WSREP_SST_OPT_CONF} $disver $iopts \$tmpopts \$INNOEXTRA --galera-info --stream=\$sfmt \$itmpdir 2> ${INNOBACKUPLOG}"
fi

get_stream
get_transfer

if [ "$WSREP_SST_OPT_ROLE" = "donor" ]
then
    trap cleanup_donor EXIT

if [ $WSREP_SST_OPT_BYPASS -eq 0 ]
    then
        usrst=0
        if [[ -z $sst_ver ]];then 
            wsrep_log_error "Upgrade joiner to 5.6.21 or higher for backup locks support"
            wsrep_log_error "The joiner is not supported for this version of donor"
            exit 93
        fi

if [[ -z $(parse_cnf mysqld$WSREP_SST_OPT_SUFFIX_VALUE tmpdir "") && \
              -z $(parse_cnf --mysqld tmpdir "") && \
              -z $(parse_cnf xtrabackup tmpdir "") ]]; then
            xtmpdir=$(mktemp -d)
            tmpopts=" --tmpdir=$xtmpdir"
            wsrep_log_info "Using $xtmpdir as xtrabackup temporary directory"
        fi

itmpdir=$(mktemp -d)
        wsrep_log_info "Using $itmpdir as innobackupex temporary directory"

if [[ -n "${WSREP_SST_OPT_USER:-}" && "$WSREP_SST_OPT_USER" != "(null)" ]]; then
           INNOEXTRA+=" --user=$WSREP_SST_OPT_USER"
           usrst=1
        fi

if [ -n "${WSREP_SST_OPT_PSWD:-}" ]; then
           INNOEXTRA+=" --password=$WSREP_SST_OPT_PSWD"
        elif [[ $usrst -eq 1 ]];then
           # Empty password, used for testing, debugging etc.
           INNOEXTRA+=" --password="
        fi

get_keys
        if [[ $encrypt -eq 1 ]];then
            if [[ -n $ekey ]];then
                INNOEXTRA+=" --encrypt=$ealgo --encrypt-key=$ekey"
            else 
                INNOEXTRA+=" --encrypt=$ealgo --encrypt-key-file=$ekeyfile"
            fi
        fi

check_extra

wsrep_log_info "Streaming GTID file before SST"

# Store donor's wsrep GTID (state ID) and wsrep_gtid_domain_id
        # (separated by a space).
        echo "${WSREP_SST_OPT_GTID} ${WSREP_SST_OPT_GTID_DOMAIN_ID}" > "${MAGIC_FILE}"

ttcmd="$tcmd"

if [[ $encrypt -eq 1 ]];then
            if [[ -n $scomp ]];then 
                tcmd=" $ecmd | $scomp | $tcmd "
            else 
                tcmd=" $ecmd | $tcmd "
            fi
        elif [[ -n $scomp ]];then 
            tcmd=" $scomp | $tcmd "
        fi

send_donor $DATA "${stagemsg}-gtid"

tcmd="$ttcmd"
        if [[ -n $progress ]];then 
            get_footprint
            tcmd="$pcmd | $tcmd"
        elif [[ -n $rlimit ]];then 
            adjust_progress
            tcmd="$pcmd | $tcmd"
        fi

wsrep_log_info "Sleeping before data transfer for SST"
        sleep 10

wsrep_log_info "Streaming the backup to joiner at ${REMOTEIP} ${SST_PORT:-4444}"

if [[ -n $scomp ]];then 
            tcmd="$scomp | $tcmd"
        fi

set +e
        timeit "${stagemsg}-SST" "$INNOBACKUP | $tcmd; RC=( "\${PIPESTATUS[@]}" )"
        set -e

if [ ${RC[0]} -ne 0 ]; then
          wsrep_log_error "${INNOBACKUPEX_BIN} finished with error: ${RC[0]}. " \
                          "Check syslog or ${INNOBACKUPLOG} for details"
          exit 22
        elif [[ ${RC[$(( ${#RC[@]}-1 ))]} -eq 1 ]];then 
          wsrep_log_error "$tcmd finished with error: ${RC[1]}"
          exit 22
        fi

# innobackupex implicitly writes PID to fixed location in $xtmpdir
        XTRABACKUP_PID="$xtmpdir/xtrabackup_pid"

else # BYPASS FOR IST

wsrep_log_info "Bypassing the SST for IST"
        echo "continue" # now server can resume updating data

# Store donor's wsrep GTID (state ID) and wsrep_gtid_domain_id
        # (separated by a space).
        echo "${WSREP_SST_OPT_GTID} ${WSREP_SST_OPT_GTID_DOMAIN_ID}" > "${MAGIC_FILE}"
        echo "1" > "${DATA}/${IST_FILE}"
        get_keys
        if [[ $encrypt -eq 1 ]];then
            if [[ -n $scomp ]];then 
                tcmd=" $ecmd | $scomp | $tcmd "
            else
                tcmd=" $ecmd | $tcmd "
            fi
        elif [[ -n $scomp ]];then 
            tcmd=" $scomp | $tcmd "
        fi
        strmcmd+=" \${IST_FILE}"

send_donor $DATA "${stagemsg}-IST"

echo "done ${WSREP_SST_OPT_GTID}"
    wsrep_log_info "Total time on donor: $totime seconds"

elif [ "${WSREP_SST_OPT_ROLE}" = "joiner" ]
then
    [[ -e $SST_PROGRESS_FILE ]] && wsrep_log_info "Stale sst_in_progress file: $SST_PROGRESS_FILE"
    [[ -n $SST_PROGRESS_FILE ]] && touch $SST_PROGRESS_FILE

ib_home_dir=$INNODB_DATA_HOME_DIR

WSREP_LOG_DIR=${WSREP_LOG_DIR:-""}
    # Try to set WSREP_LOG_DIR from the command line:
    if [ ! -z "$INNODB_LOG_GROUP_HOME_ARG" ]; then
        WSREP_LOG_DIR=$INNODB_LOG_GROUP_HOME_ARG
    fi
    # if no command line arg and WSREP_LOG_DIR is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_LOG_DIR" ]; then
        WSREP_LOG_DIR=$(parse_cnf mysqld$WSREP_SST_OPT_SUFFIX_VALUE innodb-log-group-home-dir '')
    fi
    if [ -z "$WSREP_LOG_DIR" ]; then
        WSREP_LOG_DIR=$(parse_cnf --mysqld innodb-log-group-home-dir '')
    fi

ib_log_dir=$WSREP_LOG_DIR

# Try to set ib_undo_dir from the command line:
    ib_undo_dir=${INNODB_UNDO_DIR_ARG:-""}
    # if no command line arg then try to get it from my.cnf:
    if [ -z "$ib_undo_dir" ]; then
        ib_undo_dir=$(parse_cnf mysqld$WSREP_SST_OPT_SUFFIX_VALUE innodb-undo-directory "")
    fi
    if [ -z "$ib_undo_dir" ]; then
        ib_undo_dir=$(parse_cnf --mysqld innodb-undo-directory "")
    fi

stagemsg="Joiner-Recv"

sencrypted=1
    nthreads=1

MODULE="xtrabackup_sst"

rm -f "${DATA}/${IST_FILE}"

# May need xtrabackup_checkpoints later on
    rm -f ${DATA}/xtrabackup_binary ${DATA}/xtrabackup_galera_info  ${DATA}/xtrabackup_logfile

ADDR=${WSREP_SST_OPT_ADDR}
    if [ -z "${SST_PORT}" ]
    then
        SST_PORT=4444
        if [ "${ADDR#\[}" != "$ADDR" ]; then
            ADDR="$(echo ${WSREP_SST_OPT_ADDR} | awk -F '\\]:' '{ print $1 }')]:${SST_PORT}"
        else
            ADDR="$(echo ${WSREP_SST_OPT_ADDR} | awk -F ':' '{ print $1 }'):${SST_PORT}"
        fi
    fi

wait_for_listen ${SST_PORT} ${ADDR} ${MODULE} &

trap sig_joiner_cleanup HUP PIPE INT TERM
    trap cleanup_joiner EXIT

if [[ -n $progress ]];then 
        adjust_progress
        tcmd+=" | $pcmd"
    fi

get_keys
    if [[ $encrypt -eq 1 && $sencrypted -eq 1 ]];then
        if [[ -n $sdecomp ]];then 
            strmcmd=" $sdecomp | $ecmd | $strmcmd"
        else 
            strmcmd=" $ecmd | $strmcmd"
        fi
    elif [[ -n $sdecomp ]];then 
            strmcmd=" $sdecomp | $strmcmd"
    fi

STATDIR=$(mktemp -d)
    MAGIC_FILE="${STATDIR}/${INFO_FILE}"
    recv_joiner $STATDIR  "${stagemsg}-gtid" $stimeout 1

if ! ps -p ${WSREP_SST_OPT_PARENT} &>/dev/null
    then
        wsrep_log_error "Parent mysqld process (PID:${WSREP_SST_OPT_PARENT}) terminated unexpectedly." 
        exit 32
    fi

if [ ! -r "${STATDIR}/${IST_FILE}" ]
    then

if [[ -d ${DATA}/.sst ]];then
            wsrep_log_info "WARNING: Stale temporary SST directory: ${DATA}/.sst from previous state transfer. Removing"
            rm -rf ${DATA}/.sst
        fi
        mkdir -p ${DATA}/.sst
        (recv_joiner $DATA/.sst "${stagemsg}-SST" 0 0) &
        jpid=$!
        wsrep_log_info "Proceeding with SST"

wsrep_log_info "Cleaning the existing datadir and innodb-data/log directories"
	if [ "${OS}" = "FreeBSD" ]; then
            find -E $ib_home_dir $ib_log_dir $ib_undo_dir $DATA -mindepth 1 -prune -regex $cpat -o -exec rm -rfv {} 1>&2 \+
        else
            find $ib_home_dir $ib_log_dir $ib_undo_dir $DATA -mindepth 1 -prune -regex $cpat -o -exec rm -rfv {} 1>&2 \+
	fi

tempdir=$LOG_BIN_ARG
        if [ -z "$tempdir" ]; then
            tempdir=$(parse_cnf mysqld$WSREP_SST_OPT_SUFFIX_VALUE log-bin "")
        fi
        if [ -z "$tempdir" ]; then
            tempdir=$(parse_cnf --mysqld log-bin "")
        fi
        if [[ -n ${tempdir:-} ]];then
            binlog_dir=$(dirname $tempdir)
            binlog_file=$(basename $tempdir)
            if [[ -n ${binlog_dir:-} && $binlog_dir != '.' && $binlog_dir != $DATA ]];then
                pattern="$binlog_dir/$binlog_file\.[0-9]+$"
                wsrep_log_info "Cleaning the binlog directory $binlog_dir as well"
                find $binlog_dir -maxdepth 1 -type f -regex $pattern -exec rm -fv {} 1>&2 \+ || true
                rm $binlog_dir/*.index || true
            fi
        fi

TDATA=${DATA}
        DATA="${DATA}/.sst"

MAGIC_FILE="${DATA}/${INFO_FILE}"
        wsrep_log_info "Waiting for SST streaming to complete!"
        monitor_process $jpid

get_proc

if [[ ! -s ${DATA}/xtrabackup_checkpoints ]];then 
            wsrep_log_error "xtrabackup_checkpoints missing, failed innobackupex/SST on donor"
            exit 2
        fi

# Rebuild indexes for compact backups
        if grep -q 'compact = 1' ${DATA}/xtrabackup_checkpoints;then 
            wsrep_log_info "Index compaction detected"
            rebuild=1
        fi

if [[ $rebuild -eq 1 ]];then 
            nthreads=$(parse_cnf xtrabackup rebuild-threads $nproc)
            wsrep_log_info "Rebuilding during prepare with $nthreads threads"
            rebuildcmd="--rebuild-indexes --rebuild-threads=$nthreads"
        fi

if test -n "$(find ${DATA} -maxdepth 1 -type f -name '*.qp' -print -quit)";then

wsrep_log_info "Compressed qpress files found"

if ! command -v qpress >/dev/null;then
                wsrep_log_error "qpress not found in path: $PATH"
                exit 22
            fi

if [[ -n $progress ]] && pv --help | grep -q 'line-mode';then
                count=$(find ${DATA} -type f -name '*.qp' | wc -l)
                count=$(( count*2 ))
                if pv --help | grep -q FORMAT;then 
                    pvopts="-f -s $count -l -N Decompression -F '%N => Rate:%r Elapsed:%t %e Progress: [%b/$count]'"
                else 
                    pvopts="-f -s $count -l -N Decompression"
                fi
                pcmd="pv $pvopts"
                adjust_progress
                dcmd="$pcmd | xargs -n 2 qpress -T${nproc}d"
            else 
                dcmd="xargs -n 2 qpress -T${nproc}d"
            fi

# Decompress the qpress files 
            wsrep_log_info "Decompression with $nproc threads"
            timeit "Joiner-Decompression" "find ${DATA} -type f -name '*.qp' -printf '%p\n%h\n' | $dcmd"
            extcode=$?

if [[ $extcode -eq 0 ]];then
                wsrep_log_info "Removing qpress files after decompression"
                find ${DATA} -type f -name '*.qp' -delete 
                if [[ $? -ne 0 ]];then 
                    wsrep_log_error "Something went wrong with deletion of qpress files. Investigate"
                fi
            else
                wsrep_log_error "Decompression failed. Exit code: $extcode"
                exit 22
            fi
        fi

if  [[ ! -z $WSREP_SST_OPT_BINLOG ]];then

BINLOG_DIRNAME=$(dirname $WSREP_SST_OPT_BINLOG)
            BINLOG_FILENAME=$(basename $WSREP_SST_OPT_BINLOG)

# To avoid comparing data directory and BINLOG_DIRNAME 
            mv $DATA/${BINLOG_FILENAME}.* $BINLOG_DIRNAME/ 2>/dev/null || true

pushd $BINLOG_DIRNAME &>/dev/null
            for bfiles in $(ls -1 ${BINLOG_FILENAME}.[0-9]*);do
                echo ${BINLOG_DIRNAME}/${bfiles} >> ${BINLOG_FILENAME}.index
            done
            popd &> /dev/null

wsrep_log_info "Preparing the backup at ${DATA}"
        timeit "Xtrabackup prepare stage" "$INNOAPPLY"

if [ $? -ne 0 ];
        then
            wsrep_log_error "${INNOBACKUPEX_BIN} apply finished with errors. Check syslog or ${INNOAPPLYLOG} for details" 
            exit 22
        fi

MAGIC_FILE="${TDATA}/${INFO_FILE}"
        set +e
        set -e
        wsrep_log_info "Moving the backup to ${TDATA}"
        timeit "Xtrabackup move stage" "$INNOMOVE"
        if [[ $? -eq 0 ]];then 
            wsrep_log_info "Move successful, removing ${DATA}"
            rm -rf $DATA
            DATA=${TDATA}
        else 
            wsrep_log_error "Move failed, keeping ${DATA} for further diagnosis"
            wsrep_log_error "Check syslog or ${INNOMOVELOG} for details"
            exit 22
        fi

else 
        wsrep_log_info "${IST_FILE} received from donor: Running IST"
    fi

if [[ ! -r ${MAGIC_FILE} ]];then 
        wsrep_log_error "SST magic file ${MAGIC_FILE} not found/readable"
        exit 2
    fi
    wsrep_log_info "Galera co-ords from recovery: $(cat ${MAGIC_FILE})"
    cat "${MAGIC_FILE}" # Output : UUID:seqno wsrep_gtid_domain_id
    wsrep_log_info "Total time on joiner: $totime seconds"
fi

exit 0